40’ Gooseneck 2-Axle Chassis with PSI tire inflation General Specs
Tare Weight:
Approximately 6,400 lb.
GVWR:
75,000 lb.
Steel & Fasteners:
All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better. All structural fasteners are Grade 5 or better and are zinc coated
Main Beams:
Wide flange I-beam 12″ deep, 19 lb./ft.
Cross Member:
All cross members fabricated with 10-gauge steel
Upper Coupler Assembly:
5/16″ thick pick-up plate
Fifth Wheel Height:
48 in.
Front Bolster:
Fabricated with steel casting end plates
Rear Bolster:
Channel type
ICC Bumper:
47″ long tube
Mud Flaps:
24″ X 30″ white plastic
Electrical System:
12 volt, 7-way split pin receptacle plug, modular wiring harness
Dimensions
Overall Chassis Width:
96 inches
Maximum Rear Height:
48 inches
Overall Chassis Length:
40.61 feet
Landing Gear
Landing Gear:
55,000 lb. lift capacity and 160,000 lb. static load capacity
Landing Gear Foot Group:
10″ X 10″ low profile sandshoe
Crank Handle Location:
Roadside
Lighting
Light Attachment:
Flange mounted
Light Type:
LED
Brakes
Drum:
Steel outboard mounted
Lubrication:
Synthetic Grease
Brake System Type:
2S1M
Brake Chambers:
30/30
Wheels
Rims:
8.25″ X 22.5″ hub piloted tubeless
Tire Size:
11R 22.5
Tire Inflation System:
PSI
Hub Type:
Steel
Axles
Axle Quantity:
2
Axle Centers:
49″
Tandem Location:
50 inches from rear
Kingpin Location:
30 inches from rear face of front bolster
Suspension
Suspension Type:
Spring-ride
Springs:
3-leaf
Finish
Primer:
Zinc-rich
Topcoat:
Black urethane
Reviews
There are no reviews yet.